The analysis of your water consumption can look different depending on the format in which you can provide data.
- If you can provide data on a daily basis, you will get an analysis that shows you Consumption.
- If you can provide data on an hourly basis, you will have 3 analytics showing Activity, Baseload and Peak.
You can zoom in to get a more detailed view of a segment by holding your cursor down on the graph and dragging it over the segment you want to see details for. If you want to see the data the analytics are based on, you can click on Data and Model under each analytics
Data delivered on a daily basis
Consumption
The graph is based on your average consumption and shows this, as well as your actual consumption. By looking at your average consumption, you can see if it is constant or if it has increased/decreased compared to other periods.
You will see a green mark on the graph representing best for site and a red mark if there is an alert. Your best for site is the level that the digital advisor uses as a starting point for the potential savings to be made if you return to this level.
Data delivered on an hourly basis
Baseload
The baseload analysis provides an overview of the average idle consumption. That is, the consumption when the building is empty or with the least activity.
If there are no people in the building during fixed periods of the day, it is normal for Baseload to be 0. This means that there is no water consumption during this period. If you find that consumption is constant and Baseload is higher than 0, this is often a sign of leakage.
You can choose if you want alerts on water baseload, based on the historic consumption of the building, or if you want to set a manual alert if the baseload is above a threshold you choose.
Peak
The Peak analysis gives you an overview of your consumption when there is activity in the building. The average peak helps you understand your current consumption. The analysis helps you understand if your active water consumption has increased or decreased and how it compares to previous consumption and to your current consumption.
Activity
Activity shows what percentage of the time water is used in the building. You can see on an hourly basis how consumption is distributed throughout the week and when on different days the activity is at its highest and lowest.
This analysis helps you understand your weekly consumption, giving you an overview of when most water is used, when it starts and when it ends.
For example, you can use this analysis to see if there is consumption during a period of the day when the building should be closed, or if the water consumption at specific times matches the activity in the building.
The green line represents best for site, and if the current consumption is not best for site, this will be shown with a black line.