With verifications, you can verify savings on individual buildings or across buildings. You can create as many verifications as you want and need, and there is no need to have registered a specific action first.
On your home page you will always find a verification for the current year, compared to the previous year, for each energy type.
To create a verification, click on New Verification.
You choose whether you want to do the verification for all buildings, by tags, industry or a single site. You can give your verification a title, select tags or industry if that's what you're verifying and which energy source you want to verify. If you have an expected annual savings, you can also enter this.
Next, you choose your baseline and verification period. Your baseline is the period you want to use as a basis for the verification, where the verification period is the period you want to verify energy savings for. It's possible to choose an end date in the future so you can see how the savings develop until the verification period ends. The baseline period does not necessarily have to be the same length as the verification period.
Once you fill in the information and press Create, it may take a while (up to a few hours) before the verification is ready. This depends on how many buildings and how much data are included in the verification.
You don't need a specific action to make these verifications, but select the period that is relevant for you to verify and report on.
If you want to download the results, you can do this either as CSV or in Excel format.
